|
|
|
 |
| PA |
|
 |
PA
Right angle
Excellent resistance to clogging.
Flow rate range @ 40 psi: 0.4 - 155 gpm.
Spray angle: 90º.
Materials: brass, 316 stainless steel, cast iron. Typical applications:
general purpose.
PDF
|
 |
| PB |
|
|
Type
PB Right angle
Excellent resistance to clogging. Wide angle spray. Flow rate
range @ 40 psi: 0.7 - 170 gpm.
Spray angle: 130 o Materials: brass, 316 stainless steel, cast
iron.
Typical applications: general purpose.
PDF
|
 |
| PE
|
PF |
|
|
PE/PF
Right angle
Fully machined. Sloped bottom available. Resistant to clogging.
Flow rate range @ 40 psi: 0.1 - 24 gpm.
Spray angles: 50º, 75º, 80º and 120º.
Materials: brass, 303 stainless steel, 316 stainless steel.
Typical applications: general purpose.
PDF
|
 |
| PN |
|
|
PN/PO
Right angle
Polymeric construction. Resistant to clogging. Excellent corrosion
resistance.
Flow rate range @ 40 psi: 0.4 - 11 gpm. Spray angles: 70º, 80º,
90º and 130º.
Materials: fiberglass reinforced polypropylene.
Typical applications: general purpose.
PDF
|
 |
| RB |
|
|
RB
In-line
No whirling vane. Resistant to clogging.
Flow rate range @ 40 psi: 0.4 - 24 gpm.
Spray angles: 60º, 75º and 80º.
Materials: brass, 316 stainless steel.
Typical applications: general purpose.
PDF
|
 |
| RC |
|
|
RC
In-line
Impact type. High efficiency. Wide spray angle.
Flow rate range @ 40 psi: 2 - 10 gpm.
Spray angles: 150º and 180º.
Materials: brass, 316 stainless steel.
Typical applications: general purpose.
PDF
|
 |
| RD |
|
|
RD/RE
In-line, impact type
High flow rate. High efficiency. Wide spray angle. Excellent resistance
to clogging.
Flow rate range @ 40 psi: 7.5 - 58 gpm.
Spray angle: 150º.
Materials: brass, bronze, 316 stainless steel.
Typical applications: firefighting, general purpose.
PDF
|
 |
| RX |
|
|
RX/RZ
In-line
Fine spray. Low flow rates.
Flow rate range @ 40 psi: 0.016 - 0.53 gpm.
Spray angles: 60º and 80º.
Materials: brass, bronze, 316 stainless steel.
Typical applications: general purpose.
PDF
|
back
to top
|
