Project Description

FLAT FAN NOZZLE

Loading...

Flow Rate

Materials

AISI 303 s.s.
AISI 316L s.s.
Brass
PVC, PTFE (opt.)
More materials on request

Thread specification

Male BSPT
Male NPT

From 1/8″ to 1″

J FLAT FAN NOZZLE – LOW CAPACITY

These standard flat fan nozzles are available in a wide range of capacities, spray angles and materials. Nozzles shown on this page cover the low to minimal capacity range from 0.06 to 1.60 litres per minute. The tiny outlet orifices, machined with high precision, may required to be protected from clogging by means of an adequate filter positioned inside the supply line, depending upon the quantity and type of the solid particles suspended in the liquid. These nozzles can be made with a customized inner thread for a VEF filter (*optional). We suggest to buy these nozzles with their related VEF filter.

J FLAT FAN NOZZLE – STANDARD CAPACITY

Standard flat fan nozzles are available in a wide range of different capacities, spray angles, thread sizes and materials. Used in several industrial applications, they produce a mist spray and supply an appropriate force of impact.

J FLAT FAN NOZZLE – LARGE CAPACITY

J series standard flat fan nozzles are available in a wide range of different capacities, spray angles, thread sizes and materials. The large capacity models produce a high-impact spray jet with a mist effect and a powerful washing action.

CLJet deflection angledegDULiquid outlet diammRFFemale threadinch
DConventional orifice diammFFFlange outer diammRGMale threadinch
D1Smallest free inside diammGFlange center-hole diammSQSquare bar sizemm
DELiquid inlet diammH,H1HeightmmWWeightgr, kg
DFFlange sizeinchL,L1LengthmmWSWrench sizemm
DIAOutside diametermmNRNumber of orifices
DNFlange nominal sizemmQCQuickfit connection

LOW CAPACITY

STANDARD CAPACITY

LARGE CAPACITY

NOTE: J nozzles are also available with NPT thread, but in this case the code will be H; please contact us for further information.

(1) Low capacity body
(2) Standard capacity body



IMPORTANT: the nozzle Jxx 0780 B31 is made with “low capacity” body, while when it’s fabricated with other materials is made with “standard capacity” body.



IMPORTANT: the nozzle Jxx 0780 B31 is made with “low capacity” body, while when it’s fabricated with other materials is made with “standard capacity” body.

JA – Low capacity

JB – Low capacity

Standard capacity

Large capacity