UAA, stationary
Multiple-hole sphere.
Flow rate range @ 22 psi: 10 - 160 gpm.
Pressure range: 15 - 30 psi.
Coverage angle: 360º.
Materials: 316 stainless steel.
Typical applications: Small tanks with residues consisting of liquids or non-sticking powders.
PDF

UBB, single-axis rotary
Teflon construction. 2-piece design.
Flow rate range @ 45 psi: 8 - 52 gpm.
Pressure range: 30 - 105 psi.
Maximum throw: 120".
Coverage angle: 360º.
Material: Teflon.
Typical applications: Corrosive chemicals or sanitary applications.
PDF

UBC, Single-axis rotary
Slotted orifice. Flat spray. Two ball bearing assemblies.
Flow rate range @ 45 psi: 24 - 80 gpm.
Pressure range: 30 - 105 psi.
Maximum throw: 80".
Coverage angle: 360º.
Material: 316 stainless steel.
Typical applications: general purpose.
PDF

UBF, single-axis rotary
Slotted orifice. Flat spray. Two ball bearing assemblies.
Flow rate range @ 75 psi: 10 - 13 gpm.
Pressure range: 15 - 180 psi.
Maximum throw: 60".
Coverage angle: 270º.
Materials: 316 stainless steel.
Typical applications: Smaller size tanks and limited size openings (e.g., pressurized soft drink containers and beer kegs).
PDF

UBA, Single-axis rotary
Speed controlled (internal gear reduction assembly). High impact force. Long throw.
Flow rate range @ 75 psi: 13 - 26 gpm.
Pressure range: 45 - 150 psi.
Maximum throw: 190".
Coverage angles: 270º and 360º.
Rotational speed range: 5 - 12 rpm.
Materials: 316 stainless steel (body), Teflon (bearings and gear set).
Typical applications: Smaller size tanks and limited size openings (e.g., pressurized soft drink containers and beer kegs).
PDF

UBL, dual-axis rotary
Speed controlled (positive drive piston). Synchronized inter-axis motion. High impact force. Very long throw. Useful for tanks up to 20' in diameter. No lubricants. Highly polished surfaces. Flow rate range @ 75 psi: 26 - 39 gpm.
Pressure range: 30 - 150 psi.
Maximum throw: 320".
Coverage angle: 360º.
Rotational speed range: 5 - 12 rpm.
Materials: 316 stainless steel (body and internal metal parts), Teflon (seals).
Typical applications: Large tanks where maximum cleaning capability is required or where contamination from the washer (oils, surface dirt) is an issue.
PDF

UBD/UBE, single-axis rotary
High pressure streams impact free-spinning curved blades. Low impact. Small drops. Resistant to clogging. Short wash cycles.
Flow rate range @ 30 psi: 11 - 45 gpm.
Pressure range: 15 - 60 psi.
Maximum throw: 120".
Coverage angle: 180º (up or down) or 360º Materials: UBD Series is made from 316 stainless steel (body), Teflon (bearing surfaces). The UBE Series is made from Teflon.
Typical applications: For easy-to-remove residues where wash cycle time must be minimized.
PDF