Project Description

FULL CONE NOZZLE

Flow Rate

Materials

AISI 303 s.s.
AISI 316L s.s.
Brass
Ni-plated brass
More materials on request

Thread specification

Female BSP
Female NPT

From 1/2″ to 2″

CAS FULL CONE NOZZLE – CLUSTER NOZZLE, STANDARD SPRAY ANGLE

CAS full cone nozzle has seven orifices, large spray capacities and produces very fine droplets using hydraulic pressure only. As the droplets size, among other factors, also depends on the nozzle size, these multi-orifice nozzles produce a finer spray than a standard full cone single-orifice nozzle working at the same pressure and delivering the same quantity of liquid. The surely are the best choice when fine mist effect and large spray capacity are required.

CLJet deflection angledegDULiquid outlet diammRFFemale threadinch
DConventional orifice diammFFFlange outer diammRGMale threadinch
D1Smallest free inside diammGFlange center-hole diammSQSquare bar sizemm
DELiquid inlet diammH,H1HeightmmWWeightgr, kg
DFFlange sizeinchL,L1LengthmmWSWrench sizemm
DIAOutside diametermmNRNumber of orifices
DNFlange nominal sizemmQCQuickfit connection