D FULL CONE NOZZLE – X VANE, TWO-PIECE DESIGN
D full cone nozzle with wide passage X-vanes offers a full choice of spray angles, capacities ranging from 1.18 and 1.420 l/min and connections from 1/8″ to 4″. In continuous casting cooling and other specific applications, they are used spraying upwards and operate at very high temperatures. The X-vane is safely locked into place for all dimensions up to 3/8″, to avoid it may escape from the nozzle body in case of size changes due to temperature variations, and allows to assemble the nozzle with any desired orientation. Excellent mist effect and a wide variety of applications make D full cone nozzle an optimal choice.
D FULL CONE NOZZLE – X VANE, TWO-PIECE DESIGN, LARGE CAPACITY
D full cone nozzle with large capacity is widely used in industry. The provide uniform spray coverage and are available in various thread sizes, spray angles and capacities to comply with environmental requirements. Their X-vane offers the largest free passage available in a nozzle, for an easier handling of the suspended particles and a higher resistance to clogging. D full cone nozzle provides an optimal mist effect and is effective in many industrial applications.
|CL||Jet deflection angle||deg||DU||Liquid outlet dia||mm||RF||Female thread||inch|
|D||Conventional orifice dia||mm||FF||Flange outer dia||mm||RG||Male thread||inch|
|D1||Smallest free inside dia||mm||G||Flange center-hole dia||mm||SQ||Square bar size||mm|
|DE||Liquid inlet dia||mm||H,H1||Height||mm||W||Weight||gr, kg|
|DF||Flange size||inch||L,L1||Length||mm||WS||Wrench size||mm|
|DIA||Outside diameter||mm||NR||Number of orifices||–|
|DN||Flange nominal size||mm||QC||Quickfit connection||–|