GA FLAT FAN NOZZLE – SHORT BODY
The special short body design of the GA flat fan nozzle makes it possible to use nozzle spray pipes in such machines or systems where the available space is very limited. (for ex., tight turns in traps and elbows).
They allow an even jet distribution and a proper force of impact. GA nozzles are available in two types: 1/4″ standard capacity and 3/4″ large capacity. They are made in brass, stainless steel or in plastic materials to suit different working environments. GA nozzles in plastic materials are made with a longer thread and bigger front for higher efficiency and longer service life.
|CL||Jet deflection angle||deg||DU||Liquid outlet dia||mm||RF||Female thread||inch|
|D||Conventional orifice dia||mm||FF||Flange outer dia||mm||RG||Male thread||inch|
|D1||Smallest free inside dia||mm||G||Flange center-hole dia||mm||SQ||Square bar size||mm|
|DE||Liquid inlet dia||mm||H,H1||Height||mm||W||Weight||gr, kg|
|DF||Flange size||inch||L,L1||Length||mm||WS||Wrench size||mm|
|DIA||Outside diameter||mm||NR||Number of orifices||–|
|DN||Flange nominal size||mm||QC||Quickfit connection||–|