Project Description

FLAT FAN NOZZLE

Flow Rate

Materials

AISI 303 s.s.
AISI 316L s.s.
Brass

More materials on request

Thread specification

Flange / Nipple / Plastic pipe clamp + Locknut

3/8″ – 3/4″

GX FLAT FAN NOZZLE – LOW CAPACITY

GX flat fan nozzle tips are usually mounted onto a pipe by means of a welded nipple or a clamp, and secured in place with a retaining nut. They can be easily replaced and the jet  an be conveniently oriented in the desired direction. The tips models shown on this page delivery very low flow values. Their precisely machined small orifices can be protected from clogging by means of a filter assembled inside our nipples and clamps that are designed for this purpose.

GX FLAT FAN NOZZLE – STANDARD AND LARGE CAPACITIES

GX flat fan nozzle tips are usually mounted onto a pipe by means of a welded 3/8″ nipple or a clamp, and secured in place with a retaining nut. They can be easily replaced and their jet can be conveniently oriented in the desired direction. These nozzle are available in two types: 3/8″ standard capacity and 3/4″ large capacity. The tip is assembled with a pipe clamp, a welding nipple and a locknut.

CLJet deflection angledegDULiquid outlet diammRFFemale threadinch
DConventional orifice diammFFFlange outer diammRGMale threadinch
D1Smallest free inside diammGFlange center-hole diammSQSquare bar sizemm
DELiquid inlet diammH,H1HeightmmWWeightgr, kg
DFFlange sizeinchL,L1LengthmmWSWrench sizemm
DIAOutside diametermmNRNumber of orifices
DNFlange nominal sizemmQCQuickfit connection

LOW CAPACITY

STANDARD AND LARGE CAPACITIES

(1) Low capacity body
(2) Standard capacity body

ZAA PNR welding nipplesZAA/ZAB
VEA / VEC / VED
(optional)
GXVAA
ZLA
VEA / VEC / VED
(optional)
 GXVAA
ZPB
VEA / VEC / VED
(optional)
 GXVAA
ZPC
VEA / VEC / VED
(optional)
 GX
ZAA PNR welding nipplesZAA/ZAB
VEA / VEC / VED
(optional)
GX
VAA
ZLA
VEA / VEC / VED
(optional)
 GX
VAA
ZPB
VEA / VEC / VED
(optional)
 GX
VAA
ZPC
VEA / VEC / VED
(optional)
 GX

IMPORTANT: the nozzle GXx 0780 B31 is made with “low capacity” body, while when it’s fabricated with other materials is made with “standard capacity” body.

IMPORTANT: the nozzle GXx 0780 B31 is made with “low capacity” body, while when it’s fabricated with other materials is made with “standard capacity” body.

Low capacity

Standard capacity

Large capacity