Project Description
FLAT FAN NOZZLE
HIGH IMPACT NOZZLES – STANDARD SIZE
The water path leading to the nozzle orifice has been completely redesigned to reduce energy losses caused by turbulence, all sharp cross section changes have been eliminated resulting in a significant increase in water velocity at the nozzle orifice. The afore mentioned advantages are added to those offered by a carefully designed flow stabilizer and a filter when assembled to the nipple inlet, minimizing clogging and abrasion of the nozzle orifice.
| CL | Jet deflection angle | deg | DU | Liquid outlet dia | mm | RF | Female thread | inch |
| D | Conventional orifice dia | mm | FF | Flange outer dia | mm | RG | Male thread | inch |
| D1 | Smallest free inside dia | mm | G | Flange center-hole dia | mm | SQ | Square bar size | mm |
| DE | Liquid inlet dia | mm | H,H1 | Height | mm | W | Weight | gr, kg |
| DF | Flange size | inch | L,L1 | Length | mm | WS | Wrench size | mm |
| DIA | Outside diameter | mm | NR | Number of orifices | – | |||
| DN | Flange nominal size | mm | QC | Quickfit connection | – |
ASSEMBLY PARTS
WELDING NIPPLES
ZWB
HW nozzles can be assembled on a variety of different nipples, with the same inlet, but with different lengths. The precision machined nipple inlet port assures precise positioning of the nozzle flat fan jet to the specified offset angle value of 15° with regard to manifold center line. This makes it possible to obtain uniform impact distribution yielding better decaling results.
FLOW STABILIZER
XHW
The flow stabilizer is a critical component for proper descaling, by reducing flow turbulence losses, a larger fraction of the water flow energy can be used for generating impact on the surface to be descaled. The design consists of a cylindrical brass body with a polished inner surface, housing a cast stainless steel flow stabilizer which straightens the liquid path to minimize turbulences. Different length nipples are available, with or without inlet filter. The codes always include a multifin flow straightener.
LOCKNUTS
VAW B100 B1
VAW D100 B1
The VAW B 100 B1 and VAW D 100 B1 locknuts for ZWB series descaling nipples have been designed profiting from a large experience on the field. The sturdy design and the generous dimensions give the maximum protection to the nozzle and the nipple thread. One lucknut size fits all standard size ZWB series nipple of any length.
GASKET
VDA 24C1 T3
The VDA 24C1 T3 round gasket provides proper assembly between nozzle and nipple. One size fits all standard size ZWB nipple types.
