Project Description

MW

CLASSIC ATOMIZER
Full Cone Spray

Flow Rate

Liquid flow rate (l/h): min = 15,5  max = 840
Air flow rate (Nl/min): min = 153 max = 1.670

Liquid flow rate (gph): min = 4,10 max = 222
Air flow rate (scfm): min = 5,40 max = 58,9

Materials

AISI 303 s.s., 316L s.s.
PVC
Nickel Plated
More materials on request

MW 1/2″ Body Type “A”

MW 1/2″ Body Type “B”

MW 1/2″ Body Type “C”

      SET-UPS: Pressure principle – Internal mix – Wide Angle Round spray – 1/2″

WIDE ANGLE ROUND SPRAY
Larger capacities atomizers shown in these pages work on pressure liquid feed and internal and external mix principles. A wide angle hollow cone spray is also available. Approximate jet dimensions are given in the table on the right of the page

COMPLETE  CODE
To obtain the complete code for an atomizer, it is necessary to use the set-up code you have chosen from the performance table and complete it with the code for body and options as follows.

• Replace the first two letters in the set-up code (SU) with the code for the standard body (MW).
• Add the code for the material you require.
• Add the code for the required options, if any, and the code for thread type.

      SET-UPS: Pressure principle – Internal Mix – Large Capacity Round Spray – 1/2″

LARGE CAPACITY ROUND SPRAY
Larger capacities atomizers shown in these pages work on pressure and siphon liquid feed, and internal and external mix principles.A wide angle hollow cone spray is also available.Approximate jet dimensions are given in the table on the right of the page

COMPLETE  CODE
To obtain the complete code for an atomizer, it is necessary to use the set-up code you have chosen from the performance table and complete it with the code for body and options as follows.

• Replace the first two letters in the set-up code (SU) with the code for the standard body (MW).
• Add the code for the material you require.
• Add the code for the required options, if any, and the code for thread type.

      SET-UPS: Pressure principle – Internal Mix – Large Capacity Hollow Cone Jet – 1/2″

LARGE CAPACITY HOLLOW CONE SPRAY
Larger capacities atomizers shown in these pages work on pressure liquid feed and internal mix principles. Approximate jet dimensions are given in the table on the right of the page.

COMPLETE  CODE
To obtain the complete code for an atomizer, it is necessary to use the set-up code you have chosen from the performance table and complete it with the code for body and options as follows.

• Replace the first two letters in the set-up code (SU) with the code for the standard body (MW).
• Add the code for the material you require.
• Add the code for the required options, if any, and the code for thread type.

      SET-UPS: Siphon Principle – Internal Mix – Large Capacity Full Cone Jet – 1/2″

LARGE CAPACITY FULL CONE JET
These set-ups are designed to work with a liquid fed out of an ambient pressure container, either by liquid siphoning or by gravity head.Therefore the performance tables give the water flow rate for both suction head (blue background) and gravity head (white background).The approximate spray depending upon set-up type and operating conditions are given from the table on the right.

COMPLETE  CODE
To obtain the complete code for an atomizer, it is necessary to use the set-up code you have chosen from the performance table and complete it with the code for body and options as follows.

• Replace the first two letters in the set-up code (SU) with the code for the standard body (MW).
• Add the code for the material you require.
• Add the code for the required options, if any, and the code for thread type.