Project Description

HOLLOW CONE NOZZLE

Loading...

Flow Rate

0
min
0
max
0
min
0
max

Materials

AISI 316L s.s.

Brass

More materials on request

Thread specification

Female BSP
Female NPT (on request) 

From 3/8″ to 2-1/2″

PA PB HOLLOW CONE NOZZLE – TANGENTIAL NOZZLE

PA PB hollow cone nozzle generates a hollow cone spray pattern of finely atomized droplets and works on the tangential flow principle. They are designed with a tangential method of atomization. Inside these nozzles there is an axial groove that injects the liquid tangentially into the vortex chamber where the strong centrifugal force produces a high rotational velocity and generates a finely atomized liquid flow. As these nozzles have a large free passage inside and no swirl insert, they offer the maximum resistance to clogging. PA / PB nozzles are widely used in exhaust scrubbers and are suitable to spray flows with particles.

CLJet deflection angledegDULiquid outlet diammRFFemale threadinch
DConventional orifice diammFFFlange outer diammRGMale threadinch
D1Smallest free inside diammGFlange center-hole diammSQSquare bar sizemm
DELiquid inlet diammH,H1HeightmmWWeightgr, kg
DFFlange sizeinchL,L1LengthmmWSWrench sizemm
DIAOutside diametermmNRNumber of orifices–
DNFlange nominal sizemmQCQuickfit connection–

PA

PB