Project Description
VEC – FLANGED FILTERS
VEC check-valve filters are specially designed for 3/8″ flanged nozzles. Large filtering surface grants long exercise period without cleaning necessity. We recommend to assemble these filters on small capacity nozzles to avoid clogging and enhance their performance.
| AE | Air capacity, inlet | Ncm/min | HE | Height | mm | RA | Radius | mm |
| AU | Air flow, outlet | Ncm/min | LF | Hose lenght | m | RF | Female thread | inch |
| C | Cartridge ident color | — | LP | Max operating pressure | bar | RFS | Inlet thread steam | inch |
| CA | Internal volume | liter | LQ | Max capacity | lpm | RFW | Inlet thread water | inch |
| DE | Depth | mm | LT | Max operation temperature | °C | RG | Male thread | inch |
| DI | Nipple inner dia (hose reels) | mm | M | Wire net mesh size | mesh | S | Thickness | mm |
| D,D1 | Diameter | mm | MF | Flexible hose size | inch | SV | Swivel base model | — |
| DX | Nipple inner diameter | mm | P | Depth | mm | U | Outlet thread size | inch |
| E | Inlet thread size | inch | PD | Pipe external diameter | mm | UF | Outlet fem thread size | inch |
| FF | Flange nominal dia | inch | PS | Pipe size | inch | W | Weight | kg |
| H,H1 | Height | mm | Q | Capacity | lpm | WF | Water inlet | inch |
| WS | Wrench size | mm |
To figure out mesh sizes one has to count the number of openings from the centre of any one wire to the centre of a parallel wire one inch away. The number of openings in a filter cartridge is the mesh size. We highly recommend to add filters to small capacity nozzles to hold fine particulate matter. Please refer to the table below.
