Project Description



Body & bowl:
Aluminium casting
AISI 304 s.s.

Mesh number

30 mesh
60 mesh
80 mesh

Inlet/outlet thread size

From 1/2″ to 3″

Max working pressure

40 bar


VEM filters are specially designed for high particle retention, easy maintenance and great efficiency in harsh operating conditions. Their bowl houses a large size cartridge for a longer operating life and reduced servicing times. The threaded connection to the filter body allows a quick removal with no need of tools. A plug placed at the bottom of the bowl allows to fit in a ball valve to purge the filter.

AEAir capacity, inletNcm/minHEHeightmmRARadiusmm
AUAir flow, outletNcm/minLFHose lenghtmRFFemale threadinch
CCartridge ident colorLPMax operating pressurebarRFSInlet thread steaminch
CAInternal volumeliterLQMax capacitylpmRFWInlet thread waterinch
DEDepthmmLTMax operation temperature°CRGMale threadinch
DINipple inner dia (hose reels)mmMWire net mesh sizemeshSThicknessmm
D,D1DiametermmMFFlexible hose sizeinchSVSwivel base model
DXNipple inner diametermmPDepthmmUOutlet thread sizeinch
EInlet thread sizeinchPDPipe external diametermmUFOutlet fem thread sizeinch
FFFlange nominal diainchPSPipe sizeinchWWeightkg
H,H1HeightmmQCapacitylpmWFWater inletinch
  WSWrench sizemm

To figure out mesh sizes one has to count the number of openings from the centre of any one wire to the centre of a parallel wire one inch away. The number of openings in a filter cartridge is the mesh size. We highly recommend to add filters to small capacity nozzles to hold fine particulate matter. Please refer to the table below.